Skip to content
Home » Anker Soundcore not charging

Anker Soundcore not charging

Anker Soundcore not charging

 Anker Soundcore not charging? I have a lot of the same problems as you. I was very frustrated when my Anker Soundcore died after 2 years of use, and I have no idea why it died. It was in perfect condition, and I used it every single day. I’m still trying to figure out what happened, but I know that I can’t afford to wait for Anker to fix it. I’m going to tell you how I fixed it, and I’ll show you exactly what you need to do.

 I am going to discuss about Anker Soundcore not charging

1. What is Anker Soundcore?

2. Anker Soundcore boost not charging

3. Fixing Anker Soundcore not charging

What is Anker Soundcore?

The Anker Soundcore speaker is the perfect portable Bluetooth speaker that doesn’t drain your phone’s battery. It’s small, lightweight, and has a long battery life. It’s also waterproof, which means you can use it outside without worrying about damaging it. It’s also a breeze to set up and use. All you have to do is plug it into any standard power outlet and then connect the included USB cable to your phone or tablet. After that, you’re good to go.

Anker Soundcore boost not charging

Step 1: Check your battery: Make sure that the battery is charged. If the battery is low, the charger may not be charging it properly.

Step 2: Check your wall plug: Make sure that the wall plug is plugged into a good outlet. If the wall plug is loose, the charger may not be charging it properly.

Step 3: Check your battery cables: Make sure that the cables are connected to the correct ports on your phone. If the cables are loose, the charger may not be charging it properly.

Step 4: Charge the battery

Fixing Anker Soundcore not charging

Step 1: Unplug the device: Make sure the device is unplugged.

Step 2: Check the power: Make sure that the power is on.

Step 3: Check the USB port: Make sure the USB port is plugged in and connected to your computer.

Step 4: Check the battery: Make sure the battery is charged.

Step 5: Check the cable: Make sure the cable is plugged in.

Step 6: Clean the contacts: Make sure the contacts are clean.

Step 7: Check the charging circuit: Make sure that the charging circuit is working.

Step 8: Recharge the battery: Make sure the battery is fully charged.


I don’t know what you think of it, but I have a feeling that you will agree with me when I say that there are many people out there who will be delighted to find out that Anker Soundcore not charging. I am one of them. I am sure that you are also going to be one of them. This post is about Anker Soundcore not charging. You can try these solution to fix this problem


1. How can I charge my Soundcore?

You can charge your sound core with the usb cable. Plug it into the wall and you should be able to hear the battery level.

2. How long can I use my sound core?
The battery life on your sound core is around six hours.

3. What do I do if the battery dies?

If the battery dies, you can use your sound core with an adapter. You will need to plug it in with a micro USB cable.

4. What happens if the usb cable is disconnected?

When you disconnect the usb cable, the sound core will not be able to charge.

5. What happens if I lose my sound core?

If you lose your sound core, you can call customer service. They will send you a new one for free.

6. Is there anything I should know about sound cores?

Do not take the battery out of the sound core. If you do, it will stop charging. 

7. What is the best way to charge my Anker Soundcore?

The best way to charge your Anker Soundcore is to connect it to a computer using the USB cable that came with your Soundcore.

8. Why do I need to charge my Anker Soundcore?

 Your Anker Soundcore needs to be charged so that it can work.

9. How long will it take to fully charge my Anker Soundcore?

The charging time depends on the amount of power that is used by your Anker Soundcore

Leave a Reply

Your email address will not be published. Required fields are marked *