Skip to content
Home » How to take apart speakers with no screws

How to take apart speakers with no screws

How to take apart speakers with no screws

In the past, I’ve had a lot of experience with taking apart speakers, but I never really understood how to do it. In this article, I’m going to share my best tips on how to take apart speakers with no screws.

I am going to discuss about How to take apart speakers with no screws

1. Take apart wireless speakers with no screws from a wooden Box

2. Take apart Bluetooth speakers with no screws with plastic covering.

3. A No-Screw Speaker With A Hinged Case

4. Speaker with no screws and a metal case

Take apart wireless speakers with no screws from a wooden Box

Remove the speaker from its box. Usually, the speaker has a set of screws that hide under the exterior casing of the speaker. Another possibility is that the components are glued together. It’s especially true with speakers that are painted or have a shiny surface.

You can’t bet on whether you’ll find screws in the bottom of the speakers. If you don’t, try tapping gently on the side of the case with the screwdriver handle.

You can use a thin metal blade to pry open a spot where the glue is looser than the others, then use the knife to cut through the adhesive with the edge of the blade. Be careful not to scratch the exterior.

There are two ways to remove this. You could unscrew the speaker, then place the magnet on the back of the speaker and screw the speaker back in. You could also use a knife or other sharp implement to remove the speaker.

 Take apart Bluetooth speakers with no screws with plastic covering.

The speakers with plastic enclosures have hooks that are fixed in the holes. In addition, glue is also applied to fix them firmly. But, they are simple to open.

It’s interesting to see that the speaker has a little gap between it and the enclosure. This gap makes it difficult to get the speaker in place, so use a Phillips screwdriver to carefully join the two parts together.

First remove the screws that hold the speakers together. Then pull out the plastic covering that holds the four speakers together.

When you remove the speaker it’s covered in plastic. It has four screws that you’ll have to remove before you can remove the speaker driver from the speaker itself. The speaker has a lot of wires, so you’ll need to carefully follow the instructions to get everything connected to the correct places.A good speaker can be fixed easily. 

A No-Screw Speaker With A Hinged Case

A no-screw speaker with a hinged case. You have to worry about opening up a screw driver as well. This is a very hard thing to fix as you may accidentally damage the wire inside. If you have a small flathead screwdriver, insert it into one of the seams. Try to open it from a corner. A good way to get rid of that old coffee table is to cut it into two sections, then use a chop saw to cut the legs off of it. The hacksaw is a good tool to use for opening plastic-bound books.

Speaker with no screws and a metal case

 Some speakers have a metal casing, and you can use a hacksaw to cut through the side of the speaker to access the wires inside.A better option is a Dremel tool. You’ll have to buy one with a metal cutting blade, but they’re much safer to use and less likely to accidentally damage your speaker.You may not have enough time to wrap the speaker in a towel. But if you have a drill, you can use it to drill holes into the speaker. And this is extremely dangerous, but if you hit the cone you could damage it.


In conclusion, you need to know what you’re looking for when buying a speaker system, and how to take it apart. To help you do this, we have put together a quick guide to taking apart a speaker system. We’ve done all the hard work for you, so all you have to do is follow these simple steps.


1. How can I take apart a speaker with no screws?

You can take apart a speaker without screws by cutting the wires.

2. Can I put it back together?

You can put the parts back together, but it’s best to take it apart first.

3. What kind of wire is used to connect the wires?

The wires are called “copper” wires.

4. What kind of glue is used to hold the parts together?

There is no special glue.

5. What happens if the speaker doesn’t work?

If the speaker doesn’t work, you may need to replace the power supply.

6. What happens if the speaker is damaged?

If the speaker is damaged, you will need to replace the speaker.

7. How do I know if the speaker is working?

If the speaker works, you should hear sound.

Leave a Reply

Your email address will not be published. Required fields are marked *